10 Oct Care Tips For Polished Marble Floors
Marble polishing raises its density. With improved density, the surface will remain shiny and spotless for much longer because it will be less prone to cracking, chipping, and abrasion. Additionally, marble polishing Manhattan, NY has a clean, shiny appearance that lasts for years. When cleaning polished marble, some general tips will ensure its long-term beauty. Avoid aggressive cleaners and use a dust mop and mild soap to remove dirt and stains. You can also use a baking soda poultice to remove stains.
Avoiding Harsh Cleaners
Among the most crucial tips when caring for polished marble floors is avoiding the use of harsh cleaners. These cleaners can damage the marble’s finish by etching or dulling it. It results in a marble floor that looks weathered and lacks sheen. In addition, these cleaners are often made with acidic substances.
A microfibre cloth or soft cleaning solution is a good idea when cleaning your marble floor. If spills happen, wipe them up immediately. Using a vacuum to clean marble surfaces is not recommended because it may scratch the surface.
Using a Dust Mop
To properly clean marble floors, you need to be careful to use the right cleaning products. Water with a pH-neutral soap is an excellent choice. Always rinse thoroughly after mopping to remove any soapy residue. It will also prevent the marble from becoming yellow. A dry dust mop will work well for capturing loose dirt. Using a dust mop on marble floors should be done regularly.
Using a Mild Soap
When cleaning polished marbles, use mild soap and a soft cloth. Do not use too much soap, leaving streaks and dirt. Mild dish soap will do just fine, such as castile soap, since it contains no acid or antibacterial ingredients. Avoid using commercial liquid cleaners, which contain strong acids.
If you have an oil-based stain, apply baking soda and water paste on the stained area. Let the paste dry, and then wipe it with a soft cloth. If the stain is not easily removed, use mineral spirits or acetone to dissolve it. After cleaning, dry the marble thoroughly with a soft cloth.
Using a Baking Soda Poultice to Remove Stains
When applying a baking soda poultice to a marble stain, it’s important to ensure that the paste is about 1/4 to 1/2 inch thick and should extend at least one inch beyond the stain. After applying the poultice, you should cover it with plastic wrap or painter’s tape and allow it to sit for 24 to 48 hours. Then, you can wipe it off with distilled water and a soft cloth, or you can use a polishing powder and a felt buffing pad.
If you are using an oil-based product, you must be sure to first clean the affected area with a liquid cleanser, such as a soapy solution. Then, you should follow this up with a solution of acetone. If the stain is particularly stubborn, you can use a baking soda poultice to help remove it. Apply the poultice at night and let it remain overnight. Then, rinse it with warm water and dry it with a soft microfiber towel.
Keeping Marble Surfaces Sealed
A quality marble sealer can keep unwanted materials out and preserve the beauty of your marble countertops. The sealer should be durable and stand up to water and other liquids. It should also make your marble look as good as new and remove imperfections. It is important to test it out first in a small area to ensure it works effectively.
A polished marble surface needs regular maintenance. Acids, for example, can damage the polished surface. Using acidic cleaners or foodstuffs on it can also cause permanent damage. A sealant can help prevent this damage and make it easier to clean.
Sorry, the comment form is closed at this time.