Maintenance Tips For HVAC System

It would help if you remembered a few key HVAC maintenance advice. These guidelines include changing the air filter every 30 to 90 days and checking the condenser for damage. You should also check the burner and ignition, clean or replace the condensate drain pipe, and do these other things. By following these easy instructions, you may prolong the useful life of your HVAC system.

Check the Condenser for Signs of Damage

When you notice your air conditioner is not working properly, have your air conditioner checked by a professional like Go Green Heating and Air. This part of the car’s cooling system comprises many parts; if they are dirty or worn, they can lose their function. To fix this, you can either clean the part or replace it with a new one. Another common component that requires replacement is the condenser relay switch.

You can also check the condenser for damage by noticing signs of rust and corrosion. These signs should prompt you to have the condenser replaced. It can save you money on repairs to your air conditioner. If the condenser’s surface is corroded, it is a serious threat to the system’s performance.

Replace the Air Filter Every 30 to 90 Days

To ensure proper HVAC maintenance, replacing the air filter every 30 to 90 days is recommended. The frequency varies depending on the size of your home and the amount of air circulating inside it. Larger homes require more frequent filter changes than smaller ones. You can also subscribe to an air filter subscription service to receive a fresh one regularly.

If you are concerned about air quality, it is recommended that you change the air filter more often. It is especially important for those with allergies and other respiratory problems. Dirty air filters can exacerbate these conditions and lead to health problems, including asthma attacks. While most people can wait until they notice a noticeable difference in the air quality of their homes, changing the filter more often can help you breathe easier.

Check The Condensate Drain Line

If your condensate drain line has become clogged, you must take action. You can use distilled vinegar to clear the obstruction faster or hot water with a bit of dish soap or peroxide. Either way, leave the mixture in the line for about 30 minutes before flushing it to clear it completely.

A malfunctioning condensate drain line can result in severe water damage to your home.

Often, the condensation produced during the cooling process will cause mold and algae to grow on the condensate drain pan, which can clog the line and cause water damage. Before draining the condensate line, turn off the HVAC system at the breaker or thermostat. The drip pan is usually located beneath the interior air handling unit. If you have a sheet metal panel covering the AC cabinet, you may need to remove it to reach the drain pan.

Check the Burner and Ignition.

If you’re having trouble with your furnace’s ignition, you should have it inspected by a professional HVAC service. A dirty burner and flame sensor can lead to intermittent ignition or lockout. It can also result in short-cycling or no heat—clean these components with a water/soap solution. You should also check the burner and ignition cable connections and ensure they’re tight.

The ignition board and burner may need to be replaced if it’s not working properly. It controls the gas flow and spark. It should be cleaned and oiled to reduce the risk of a fire. The gas valve may also need to be adjusted or replaced. Make sure that the gas pressure is adequate for the furnace’s operation. Also, make sure the fuel lines are tight and free of leaks.